[AmigaOS 3.1 Command Reference\Binddrivers]
Purpose: To bind device drivers to hardware.
BINDDRIVERS is used to load and run device drivers for add-on hardware that
is automatically configured by the expansion.library. The device drivers
must be in the SYS:Expansion directory for BINDDRIVERS to find them.
BINDDRIVERS is normally placed in the Startup-Sequence file. If drivers
for expansion hardware are in the Expansion directory, you must have a
BINDDRIVERS command in your Startup-Sequence or the hardware will not be
configured when the system is booted.
Converted from AmigaGuide to HTML by Jaruzel