[Guide to AmigaDOS 3\CMD]
Format: CMD <devicename> <filename> [OPT s|m|n]
Template: DEVICENAME/A, FlLENAME/A, OPT/K
Purpose: To redirect printer output to a file.
The <devicename> can be serial, parallel or printer, and should be the same
device as specified in the Printer editor. <Filename> is the name of the
file to which the redirected output should be sent. The CMD options are as
Skip any short initial write (usually a reset if redirecting a screen dump).
Intercept multiple files until a BREAK command or Ctrl+C is entered.
Notify user of progress (messages are displayed on screen).
1> CMD PAR: RAM:cmd_file
Any output sent to the parallel port will be rerouted to a file in RAM:
Converted from AmigaGuide format to basic HTML by Jaruzel.