[Guide to AmigaDOS 3\RemRAD]
Format: REMRAD [<device>] [FORCE]
Purpose: To remove the recoverable ramdrive.device.
If you want to remove the recoverable ramdrive.device (usually mounted as
RAD:) from memory, and you do not want to turn the system off, you can use
the REMRAD command. If you have mounted more than one recoverable
ramdrive.device, use the DEVICE specification.
REMRAD commands the ramdrive.device to delete all of its files and become
inactive. The next time the Amiga is rebooted, the ramdrive.device is
removed from memory completely. If the device is in use at the time the
REMRAD command is given, the operation will abort with a device in use
message. To remove it even if it is in use, you must use the FORCE option.
Converted from AmigaGuide format to basic HTML by Jaruzel.